Discuz! Board

热搜: 活动 交友 discuz
查看: 175|回复: 0

How to Connect a Laundry Sink to a Drain









Rank: 1

发表于 2022-6-6 08:39:30 | 显示全部楼层 |阅读模式
Installing a utility sink requires you to know how to connect it to a drain. In order to install one, you'll need a pipe splitter and flexible tubing. Then you'll attach the washer to the pipes and then attach the splitter to the utility sink's hot and cold lines. Once you have everything connected, you'll need to tighten the nut and secure the connection. https://www.nivito.ie

Before installing the utility sink, make sure that the water is turned off. You can either connect it to the p-trap or standpipe that the washer has or you can install it independently. However, this requires a lot more work. Once you' ve installed it, you need to install a trap and vent. Here's how. If you are unable to do it on your own, you can call a plumber. If you're planning to install the utility sink next to the washing machine, you need to know how to connect it to the drain. To begin, you should turn off the main water supply before starting the installation process. This will save you from any potential mess and messes while working. Measure the length of the drain pipe. You can do this by measuring the distance from the sink to the ground. If you're connecting the sink to a washing machine, you'll need to locate the corresponding drain line on the machine.
After you've installed the utility sink, you need to attach the drain pipe. The water lines will come out of the washer and the drain. Adding a utility sink to the washing machine is a great idea if you have plenty of patience and the right tools. Ensure that the main water supply is turned off before beginning the project. To connect the sink to the drain, measure the length of the drain pipe from the https://www.nivito.ie ">kitchen sink</a > to the ground. Once you've found the drain line, you'll need to find the drain on the washing machine and locate the pipe that runs from there.
The process of connecting a utility sink to the drain of the washing machine can be tricky and confusing. You'll need to be patient and have the right tools and materials to make the job go as smoothly as possible. Ensure that the plumbing is connected to the vent before you begin work. Once you've done this, you can install a new utility basin to the existing utility sink. Once the new washer is installed, you'll need to connect the drain pipe to the drain line of the utility sink.


使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册


Archiver|手机版|小黑屋|DiscuzX ( 滇ICP备18003329号-1 )

GMT+8, 2022-7-4 12:02 , Processed in 0.038380 second(s), 4 queries , Redis On.

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表